FEATURES:

• Highly reliable rugged construction
• Clear flow paths give highest Kv / Cv rating
• Non chocking construction to suit harsh environment
• Pressure assisted positive sealing helps to achieve Zero leak characteristics
• Unique Floating Seal design result in long life and trouble free operation
• Non sliding parts ensure consistent operation
• The spring return mechanisms ensure that the valves are suitable for vibrations up to 9g
• The valves can be mounted in any position
• Short travel results in quick response time and as a result allow rapid cycling upto 1200 cycles per minute
• Life in excess of 20 million cycles
• Sub-base version available for most valves to facilitate faster maintenace and reduced down time
• Wide range to suit each application demand. Current range includes valves for vacuum, cryogenic application to high temperature application upto 250 ^oC.
• High efficiency solenoid construction requiring low power to operate
• Low temperature rise due to efficient use of energy which allows higher media/environment temperature.
• Low inrush, long life
• Low back surge due to low power consumption
• Solenoid is continuous duty rated
• Solenoid can be rotated full 360 degrees in most constructions to suit cable orientation
• The solenoid is tropicalized to suit the environment
• Noiseless operation due to excellent design and good manufacturing techniques.
• IP 67 by default make all the solnoid variations suitable for outdoor installation
• Wide variations available to suit the application environment
• wide terrmination area available for intergral Junction box type constructions in both general purpose and Explosion proof applications.
• Rotex uses solenoid with a maximum 11 Watt. Rotex uses a surge suppressor device in all solenoid above 10 watt power consumption and in all flameproof valves as a standard.
• Rotex offers full interchangeability of solenoid from AC voltage to DC voltage or vice versa by changing only solenoid and without changing any other components.

SPECIFICATION:

• Body material: SS316, Hard Anodized Aluminium, Brass
• Type: 2 Port, 2 Position
• Operation: Direct Acting
• Orifice: 1.2 - 4 mm and 5 - 12 mm
• Operationg Pressure Range: 0 - 100 bar, Vaccum upto 10^-6 Torr
• Temperature of Fluid: -40 ^oC to 80 ^oC
• Operating Voltage: 

                          AC: 24, 110, 220, 240 (50 Hz/ 60 Hz)                                   DC: 6, 12, 24, 48, 72, 110, 220

• Power Consumption: Size 1 coil: 6W, Size 2 coil: 11W
• Enclosure:

                   1. General Purpose Flying lead / Plug-in

                   2. Weather-Proof: Flying lead & Plug in type, Terminal Box as per IS 13947

                   3. Explosion-Proof with junction box as per IS 2148 group I, IIA, IIB and IIC

                   4. Explosion-Proof with Junction box as per ATEX, INMETRO, CE and UL (in process) available