|
Pneumatic Cylinders (8 - 160mm) General Features (8 to 160 mm Pneumatic Cylinder)
- Lubrication not necessary (maintain once started oil mist lubrication)
- Compressed air dried to a pressure dew point 3 - 5 degree centigrade admissible
- Operating medium: Compressed air, filtered to minimum 50 ¼m
- Operating pressure range 1-10 bar
- Operating Temperature range - 20 OC to + 70 OC
- Cylinder can be dismantled for servicing
- Life 20,000 km
- Speed 3 m/sec maximum
- Polyurathane seals
8 to 25 mm Pneumatic Cylinder
- According to ISO 6432 & CETOP RP 52 P
- Shock resistant rubber buffers at both ends
- Minimum operating pressure 0.5 bar
- Bore Sizes: 8, 12, 16, 20, 25
32 to 160 mm Pneumatic Cylinder
- According to ISO 15552 & VDMA 24562
- Cylinder tube of extruded profile aluminium
- Cushioning adjustable at both ends,
- high energy absorption with PU
- Minimum operating pressure 0.3 bar
- Bore Sizes: 32, 40, 50, 63, 80, 100, 125, 160
Short Stroke Cylinders
- Compact/ Short stroke cylinder
- 50% reduced size against other series
- Permanent magnet on the cylinder piston
- High speed, non rotating options available
- Male/ Female option available
- Bore Size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100
Reed Switch Option
- The position of the piston of the ROTEX cylinder can be detected by installing a Reed Switch. The switch is a non contact Reed type design and is in Normally open position. The switch closes when it approaches the magnetic field. A permanent magnet is fitted on the piston rod
- Polycarbonate body, with adjustable angular &linear positions
- High glow LED, suitable for outdoor application
- IP 65 Construction
- Universal for AC / DC
|
